Barbell Collars: How To Find The Right One

Barbell Collars: How to Find the Right One

Is your home gym safe to lift in?

Sure, you have considered all the basic rules; you have made sure the floor is stable, that the ceiling height is safe, and ensured that there is no clutter or tripping hazards in your workout space. But have you purchased yourself a pair of barbell collars?

Barbell collars are one of the easiest accessories to overlook when a person is setting up their home gym.

However, all you need is a sudden failed lift or miscalculation of your barbell weight to quickly realize that lifting without barbell collars can be a dangerous decision to make.

What Exactly Are Barbell Collars?

To put it plainly, barbell collars are round clamps that you add to your barbell after you have loaded up with your plates.

They are usually sold in pairs. 

They work by keeping your barbell weight in place; when used correctly, barbell collars prevent weights from sliding, moving, or shifting while you workout.

The best barbell collars help to ensure that you remain balanced under the barbell weight and that the weights stay in place during your dynamic movements.

Barbell collars should be used during all exercises that require a barbell and barbell weights, including squats, deadlifts, bench presses, pulls, and are a must use during any Olympic weightlifting movements. 

One of the riskiest scenarios that can happen to a weightlifter who is lifting without barbell collars is losing your balance and having the plates topple off your barbell. Trust me, I have seen it.

A guy was squatting at my local gym and lost his balance. The bar on his back dropped to one side, and sent the plates rolling off and smashing through the gym wall drywall.

Thankfully, some nearby good Samaritans rushed in to help the guy safely rerack his barbell before he could sustain any injury. But, if he was lifting at home without a spotter, I could imagine this situation resulting in more than just a damaged wall. 

I share this story with you to really paint a picture of just how easily barbell collars can make your home gym training that much more safe, especially if you work out alone.

So, you can see now that I would never move a weighted barbell without first attaching barbell collars, and you should do the same. 

The Best Barbell Collars 

#1. Rogue USA Aluminum Collars

Rogue USA Aluminum Collars, June 2021

First of all, the Rogue USA Aluminum Collars are made with aircraft-grade 6061 Billet Aluminum, so I cannot think of a stronger and more durable material choice when it comes to barbell collars that are going to stand up during your most aggressive lifting sessions. 

Because of the strength of these Rogue USA Aluminum Collars, they do have some weight to them, 0.5 lbs total to be exact.

  • Width: 1.5"
  • Weight: 0.5LB per pair
  • Rubberized interior lining
  • Olympic Barbell Collars

You will want to consider this additional weight when you are loading up your bar for your next training cycle or PR attempt.

The Rogue USA Aluminum Collars uses a lock open lever to attach to your barbell weight. This means that you can pull these barbell collars wide open, allowing you to easily slide them onto either side of your barbell and lock them closed with the lever. I find this to be an easy and pain free method of installing barbell collars. 

This pair of barbell collars has a unique rubber interior lining to ensure that no matter how many times your pull this pair on and off your barbell (which will be many times, because the Rogue USA Aluminum Collars are built to last), your barbell and barbell weights will never suffer any scuff marks or damage.  

The Rogue USA Aluminum Collars have a 1.5 inch width that is compatible to fit onto any standard barbell or Olympic barbell sleeve and create a snug fit around the bar. This barbell collar pair also has an attractive metallic chrome finish that blends in with the appearance of the bar. 

I bought my Rogue USA Aluminum Collars from the Rouge website for a fair $50. 


#2. Lock-Jaw Pro 2 Barbell Collars

These Lock-Jaw Pro 2 Barbell Collars are a tried and trusted choice in the world of Olympic barbell collars, and for good reason.

The Lock-Jaw Pro 2 Barbell Collars feature spring loaded snap latch technology that I find easily snaps on to firmly grasp the barbell upon installation, and then just as easily pops off when you pull the lever to take these barbell collars off at the end of your set.

  • Larger lever
  • With Spring Loaded Snap Latch
  • Suitable for all 2"
  • 50mm Olympic bars and all lifts.

I also appreciate the large lever design on these Lock-Jaw Pro 2 Barbell Collars, which makes it so simple to open these barbell collars, whereas others can be uncomfortably tight and need a lot of force to remove. 

Lock-Jaw Pro 2 Barbell Collars also are designed with elastomer pads and a resin frame to prevent them from scuffing or damaging your barbell or plates while you attach and remove them. 

Use the Lock-Jaw Pro 2 Barbell Collars with any 2 inch barbell, during all your barbell lifts.

Mine are from the Lock-Jaw Barbell Collars online store, where you can purchase your own pair for only $42.99.


#3. Rogue HG 2.0 Collars

I know athletes who will only use their Rogue HG 2.0 Collars when they are training a top set or attempting a PR, because of how well these best barbell collars hold up against heavy weights.  

The Rogue HG 2.0 Collars use solid nylon resin for a strong construction. They feature a unique spring mechanism that holds tight around your barbell for ultimate control of the weights, but also springs open with ease when you pull on the lever before unloading your plates.

  • Fits 2" Olympic Weightlifting Bars
  • Weight: 0.85LB per pair
  • Width: 1.875"
  • Solid Nylon Resin Construction

Keep in mind that the Rogue HG 2.0 Collars weigh an additional 0.85 lbs. to your barbell weight.

Although, I find these Olympic barbell collar’s weight is part of what makes them so durable; in my experience, no matter how many times I have dropped my bar loaded with bumper plates while performing Olympic weightlifting movements, these Rogue HG 2.0 Collars never loosen or budge. 

The Rogue HG 2.0 Collars fit most 2 inch barbells and specialty bars. These barbell collars also promise to never damage your bar or plates.

You can pick up your pair of Rogue HG 2.0 Collars from the Rouge online website, where you can also enjoy fast shipping and order tracking. For just $40.00 a pair, you really can’t go wrong.  


#4. OSO Mighty Collars

On this list of the best barbell collars, the OSO Mighty Collars stand out for being the most affordable choice, which can be a big selling point for people who have already shelled out hundreds on their home gym. 

And, despite their lower cost, the OSO Mighty Collars do not cut any corners when it comes to quality.

Manufactured right here in American, the OSO Mighty Collars uses aircraft quality aluminium to ensure that your plates are secure no matter how many times you push, press, snatch, or drop your bar.

  • Fits 50MM Olympic Bar Sleeves
  • Weight: 0.3LB
  • Black Rubberized interior lining
  • Locking clamp mechanism

These Olympic barbell collars are super lightweight, weighing in at only 0.3 lbs. as a pair.

When I use these barbell collars, I don’t feel them at all when I am under the bar, which is important because I will be the first to say that when you are pushing weights up close to your PR max, you really do feel every pound on that bar.

The OSO Mighty Collars light weight also makes them easy to toss into your gym bag as you move from one exercise to another. 

The OSO Mighty Collars are another Olympic barbell collar that uses the lock/unlock mechanism to give you easy installation when adding these to your loaded bar. They snap on and off of any 50MM Olympic bar sleeve. 

Are the OSO Mighty Collars the best barbell collars for you? You can find them for sale on the Rogue Fitness website for a budget friendly $27.50, and pick between a coloured finish of gun metal or blue.  


#5. Rogue Proloc 1 Collars

If you own a range of barbells that vary in size and design, you will most likely be looking for a versatile barbell collar that can fit securely onto these bars.

If that is the case, look no further than the Rogue Proloc 1 Collars.

These Rogue Proloc 1 Collars use knobs that adjust and lock around your barbell to ensure your plates are not going anywhere, no matter how much weight you are using, and how many sets you have to complete. 

  • Fits 50MM Olympic Bar Sleeves
  • Weight: 0.3LB
  • Black Rubberized interior lining
  • Locking clamp mechanism

The Rogue Proloc 1 Collars are compatible with Olympic and Powerlifting barbells, and can also be used for added safety on loaded Rogue Farmer’s Walk Handles, Swiss bars, Camber bars, Safety Squat bars and more.

If you are unsure if the Rogue Proloc 1 Collars will fit your bar, a simple measurement can help you find out; the Rogue Proloc 1 Collars are the best barbell collars to snap securely onto bars that have sleeves that are 1.937" to 2.007" wide.

I purchased my Rogue Proloc 1 Collars from the Rogue Fitness website, where they come as a pair for $42.15, an awesome deal in my mind if you consider the fact that these might very well be the only barbell collars you need to buy.

When they are purchased directly from Rogue, the Rogue Proloc 1 Collars also come with a 2 year warranty for your peace of mind.


Final Thoughts 

In all, if you intend to push any amount of weight with your barbell, and especially if you are working out in a home gym on your own, you need to add barbell collars to your workout space.

Without them, you could be putting your safety on the line and your home set up at risk of some serious and costly damage. 

Before you make any final purchases, make sure that you know what size barbell you are purchasing your barbell collars for, since these collars do vary in the width of barbell sleeves that they will securely lock on to.

For a firm and durable grip around your barbell weight, you must ensure the barbell collars you are buying are suited for your bar sleeves.

Otherwise, with a wide range of styles and price points available, you are sure to find the best barbell collars that suit your lifting needs, so you can get off the online shopping sites and safely under your loaded barbell in no time! 

Rogue USA Aluminum Collars, June 2021

Rogue USA Aluminum Collars

The Best Barbell Collars

  • Width: 1.5"
  • Weight: 0.5LB per pair
  • Rubberized interior lining
  • Get the BEST price now
Denver Matheson
 

I spend a lot of time at the gym and even more time in the kitchen giving my body what it needs to repair itself and grow stronger. The third most important place for any athlete is their research zone. That's exactly why this site exists, to help me share all of the information I've learned throughout the years just like people did for me in the first place!

Click Here to Leave a Comment Below 0 comments

Leave a Reply: